Preparing a wall for applying textured plaster

Access ready-to-use Telemarketing Data to expand outreach, generate quality leads, and maximize your marketing ROI.
Post Reply
zihadhosenjm40
Posts: 524
Joined: Sat Dec 21, 2024 3:30 am

Preparing a wall for applying textured plaster

Post by zihadhosenjm40 »

Preparing walls for applying textured and structural plaster
The specified compositions can be applied to walls made of any building materials, be it metal, wood, brick or concrete. Such decorative plaster allows the treated surfaces to breathe. In addition, it is not afraid of moisture, being waterproof. The service life of textured and structural compositions is measured in decades. At the same time, the walls for their application can be prepared not particularly carefully.


You don't need to level the surfaces to a perfect condition. Such material will hide all the swellings, small gaps and other minor defects on the wall during its use. Preparation of walls for decorative plaster (structural and textured) consists of the following:

You clean the wall surface from old finishing.
Remove oil stains, if any, with solvent, and croatia mobile database wash the wall with a regular soap solution.
Seal deep cracks with cement mixture.
Treat the walls with an antifungal mixture (in dry rooms you may not need to do this), then apply a primer to them.
When the primer mixture is completely dry, treat the wall with putty. It will level the surface. In fact, putty is used as a base for subsequent application of decorative plaster. If you plan to treat the walls with a thick relief layer, it is permissible not to use putty.
After 24 hours (this is how long it takes for the putty to dry), it is necessary to treat the wall surfaces with an acrylic primer. It greatly improves the adhesion of the layers.
The final stage of preparing the walls is sanding them with fine-grained sandpaper. As we can see, there should be no real difficulties in preparing surfaces for plastering for a home craftsman. Just follow the instructions above.

How to prepare walls for applying Venetian decor?
Surface treatment before using Venetian plaster should be done much more carefully. This is due to the characteristics of the decorative material. The scheme of work execution is given below:
Post Reply