Installation of a rafter system for a pitched roof

[zihadhosenjm40]

The algorithm for installing a rafter system is typical. First, a piece of board is applied to the end of the building and the saw cut lines are outlined. Then, the required number of rafter legs are sawed using a template. They are installed in the traditional way according to the markings made on the walls in advance. Nails or self-tapping screws are sufficient for fastening the elements of the rafter system over light household buildings. The hardware is screwed or hammered in at an angle, trying to ensure that there are no gaps between the parts being connected.

The wind board is fastened around the perimeter after the wall sheathing has been installed. The example shed does not have eaves overhangs. However, if desired, they can be made by installing rafters of a length that takes into account the formation of overhangs. It is planned to lay a soft roof, under which a continuous sheathing is arranged. The dimensions of the sheathing made of plywood, gypsum fiberboard, boards or OSB-3 are determined by the outer plane of the wind board.

The angle of inclination is small, so the use of waterproofing is highly desirable even if the wetness of the items stored in the shed is not too disturbing. Waterproofing will protect the wooden ghana mobile database of the building from rotting and subsequent inevitable failure.

Detailed video instruction
The video will give you a clear picture of the process of constructing a rafter system for a pitched roof:

We have considered the most typical examples, relevant and accessible for self-made. We have described in detail the technological nuances of typical situations. These are basic options that can well become the basis for your own developments. The sizes change due to individual needs, but the principles of constructing rafter frames for pitched roofs are stable. Knowing them is useful for both independent craftsmen and owners who want to competently control the work of builders.

A single-pitched roof is not often found in private housing construction. Although, according to some, this is in vain, because the installation of a single-pitched roof is much easier than the installation of a gable roof. On the other hand, such a roof structure will not be able to keep the heat in the room so well. That is why a single-pitched roof is most often used for the construction of a garage, a country house or a shed.