It is important to dig the holes at the same distance from each other.
Posted: Tue Feb 18, 2025 3:30 am
They remove the trash, level the ground so that there are no holes or hummocks, pull out the grass, and transplant the bushes to another place.
Using a tape measure, rope and pegs, mark the perimeter of the structure and the locations of the foundation pillars. Each subsequent peg is stuck into the ground, 120–150 cm away from the one already installed.
If you don't want to pour concrete, you can place ready-made blocks in the holes
Assembling the frame
The wooden frame of the gazebo is india car owner data strictly according to the instructions:
The purchased beams are sawn according to the dimensions of the building and cleared of splinters using a plane.
The concrete pillars are freed from the formwork and covered with waterproofing material. For this purpose, pre-cut pieces of roofing felt measuring 30x30 cm are taken. The upper part of each support is protected with two layers of waterproofing material.
The lower frame harness, made of four strong beams, is placed on the posts. One wooden element is connected to another using the "tenon-groove" method. The resulting connections are reinforced with metal brackets.
The frame assembly begins with the installation of the racks.
The floorboards are laid on the joists without leaving any gaps
Construction of the roof
The creation of a pitched roof does not require a lot of effort, as is the case when constructing a roof with two slopes. But, despite the simplicity of the structure, a pitched roof is a reliable structure that serves as a barrier from raindrops and hides its visitors in the shade.
Using a tape measure, rope and pegs, mark the perimeter of the structure and the locations of the foundation pillars. Each subsequent peg is stuck into the ground, 120–150 cm away from the one already installed.
If you don't want to pour concrete, you can place ready-made blocks in the holes
Assembling the frame
The wooden frame of the gazebo is india car owner data strictly according to the instructions:
The purchased beams are sawn according to the dimensions of the building and cleared of splinters using a plane.
The concrete pillars are freed from the formwork and covered with waterproofing material. For this purpose, pre-cut pieces of roofing felt measuring 30x30 cm are taken. The upper part of each support is protected with two layers of waterproofing material.
The lower frame harness, made of four strong beams, is placed on the posts. One wooden element is connected to another using the "tenon-groove" method. The resulting connections are reinforced with metal brackets.
The frame assembly begins with the installation of the racks.
The floorboards are laid on the joists without leaving any gaps
Construction of the roof
The creation of a pitched roof does not require a lot of effort, as is the case when constructing a roof with two slopes. But, despite the simplicity of the structure, a pitched roof is a reliable structure that serves as a barrier from raindrops and hides its visitors in the shade.