How to do it yourself: step-by-step instructions
Posted: Thu Feb 06, 2025 9:05 am
Combined
There is a single scheme for installing forced ventilation in a garage. An air duct or opening naturally supplies air. A special forced mechanism is installed inside such a channel.
The exhaust fan takes the exhaust air guatemala mobile database the upper layer. The garage space is discharged. The low-pressure area acquires traction. Air is drawn in naturally. The law of aerodynamics allows such a system to operate in any weather conditions.
Supply
The supply ventilation system is based not on removing exhaust air, but on renewing it with a fresh influx of new volume.
Ventilation outlets are located at a height of 30–50 cm from the floor. The outlets are made 2 times wider than when equipping exhaust ventilation. The channels are specially placed to capture a larger flow of fresh air. For this purpose, a grate is placed at the bottom of the gate.
Attention: With an elongated garage configuration, it is most convenient to place the ventilation ducts in the center of the garage in the long wall.
Corrugated pipes are laid in the wall openings. The maximum height difference between the channels will create the best conditions for the exhaust system. This is achieved by choosing the longest pipe. If the garage roof is low, you can take a short pipe and extend it with a plastic pipe (how to make ventilation from plastic pipes with your own hands?).
With a pit
Garages are often equipped with inspection pits. Let's consider how to make ventilation in a garage taking into account this feature. There are several ways to construct ventilation in a garage with a pit:
There is a single scheme for installing forced ventilation in a garage. An air duct or opening naturally supplies air. A special forced mechanism is installed inside such a channel.
The exhaust fan takes the exhaust air guatemala mobile database the upper layer. The garage space is discharged. The low-pressure area acquires traction. Air is drawn in naturally. The law of aerodynamics allows such a system to operate in any weather conditions.
Supply
The supply ventilation system is based not on removing exhaust air, but on renewing it with a fresh influx of new volume.
Ventilation outlets are located at a height of 30–50 cm from the floor. The outlets are made 2 times wider than when equipping exhaust ventilation. The channels are specially placed to capture a larger flow of fresh air. For this purpose, a grate is placed at the bottom of the gate.
Attention: With an elongated garage configuration, it is most convenient to place the ventilation ducts in the center of the garage in the long wall.
Corrugated pipes are laid in the wall openings. The maximum height difference between the channels will create the best conditions for the exhaust system. This is achieved by choosing the longest pipe. If the garage roof is low, you can take a short pipe and extend it with a plastic pipe (how to make ventilation from plastic pipes with your own hands?).
With a pit
Garages are often equipped with inspection pits. Let's consider how to make ventilation in a garage taking into account this feature. There are several ways to construct ventilation in a garage with a pit: