Pink mold in the bathroom, how to get rid of it
Posted: Thu Feb 06, 2025 4:31 am
If the mold in the bathroom has returned, it means that the spores are nesting under the building material. You will have to mechanically remove the sealant. This can be done with a sharp knife.
Cut off both sides, throw away the old sealant and remove any debris that may remain at the joint between the bathtub and the wall. The place where the seam was located can be poured with isopropyl alcohol. After thirty minutes, remove the remaining liquid with rags. Do not use the bathtub for at least 24 hours. Then seal the voids with new building material.
You can also fill the places where there was moldy benin mobile database with a solution of copper sulfate. Mix a tablespoon of copper sulfate with 1000 milliliters of water. Apply the product carefully, use a brush. Protect your hands with gloves.
If there are children or animals in the house, use tea tree oil. Dissolve ten milliliters in two glasses of water and treat the sealant or already cleaned seam. You do not need to wash off the oil.
When touching on the issue of how to remove mold in the bathroom, it is impossible not to mention pink mold. It is less common than black mold, its spores also often multiply at the joints of seams. You can fight pink mold formations using the methods described above, such as using hydrogen peroxide, bleach or soda and vinegar.
You can also buy furacilin tablets at the pharmacy. Crush two packs of the drug. Pour a glass of warm water over the powder. Mix everything well and pour into a spray bottle. Spray the solution directly onto the pink mold, and after 40-50 minutes, wipe the treated area dry.
Removing the smell of dampness in the bathroom
If you have managed to get rid of black mold in the bathroom, but it still smells damp, it means that fungal spores are still in the air.
It is possible that the smell has also managed to soak into the items stored in the bathroom. You can get rid of the unpleasant mold smell like this:
Cut off both sides, throw away the old sealant and remove any debris that may remain at the joint between the bathtub and the wall. The place where the seam was located can be poured with isopropyl alcohol. After thirty minutes, remove the remaining liquid with rags. Do not use the bathtub for at least 24 hours. Then seal the voids with new building material.
You can also fill the places where there was moldy benin mobile database with a solution of copper sulfate. Mix a tablespoon of copper sulfate with 1000 milliliters of water. Apply the product carefully, use a brush. Protect your hands with gloves.
If there are children or animals in the house, use tea tree oil. Dissolve ten milliliters in two glasses of water and treat the sealant or already cleaned seam. You do not need to wash off the oil.
When touching on the issue of how to remove mold in the bathroom, it is impossible not to mention pink mold. It is less common than black mold, its spores also often multiply at the joints of seams. You can fight pink mold formations using the methods described above, such as using hydrogen peroxide, bleach or soda and vinegar.
You can also buy furacilin tablets at the pharmacy. Crush two packs of the drug. Pour a glass of warm water over the powder. Mix everything well and pour into a spray bottle. Spray the solution directly onto the pink mold, and after 40-50 minutes, wipe the treated area dry.
Removing the smell of dampness in the bathroom
If you have managed to get rid of black mold in the bathroom, but it still smells damp, it means that fungal spores are still in the air.
It is possible that the smell has also managed to soak into the items stored in the bathroom. You can get rid of the unpleasant mold smell like this: